# UniFi Poller v2 primary configuration file. TOML FORMAT #
###########################################################

[poller]
  # Turns on line numbers, microsecond logging, and a per-device log.
  # The default is false, but I personally leave this on at home (four devices).
  # This may be noisy if you have a lot of devices. It adds one line per device.
  debug = false

  # Turns off per-interval logs. Only startup and error logs will be emitted.
  # Recommend enabling debug with this setting for better error logging.
  quiet = true

  # Load dynamic plugins. Advanced use; only sample mysql plugin provided by default.
  plugins = []

#### OUTPUTS

    # If you don't use an output, you can disable it.

[prometheus]
  disable = true
  # This controls on which ip and port /metrics is exported when mode is "prometheus".
  # This has no effect in other modes. Must contain a colon and port.
  http_listen = "0.0.0.0:9130"
  report_errors = false

[influxdb]
  disable = false
  # InfluxDB does not require auth by default, so the user/password are probably unimportant.
  url  = "dbip"
  user = "influxdbuser"
  pass = "influxdbpass"
  # Be sure to create this database.
  db = "unifidb"
  # If your InfluxDB uses a valid SSL cert, set this to true.
  verify_ssl = false
  # The UniFi Controller only updates traffic stats about every 30 seconds.
  # Setting this to something lower may lead to "zeros" in your data.
  # If you're getting zeros now, set this to "1m"
  interval = "30s"

#### INPUTS

[unifi]
  # Setting this to true and providing default credentials allows you to skip
  # configuring controllers in this config file. Instead you configure them in
  # your prometheus.yml config. Prometheus then sends the controller URL to
  # unifi-poller when it performs the scrape. This is useful if you have many,
  # or changing controllers. Most people can leave this off. See wiki for more.
  dynamic = false

# The following section contains the default credentials/configuration for any
# dynamic controller (see above section), or the primary controller if you do not
# provide one and dynamic is disabled. In other words, you can just add your
# controller here and delete the following section.
[unifi.defaults]
  #role       = "main controller"
  url        = "https://127.0.0.1:8443"
  user       = "unifiuser"
  pass       = "unifipassword"
  sites      = ["all"]
  save_ids   = false
  save_dpi   = false
  save_sites = true
  verify_ssl = false

# The following is optional and used for configurations with multiple controllers.

# You may repeat the following section to poll multiple controllers.
#[[unifi.controller]]
  # Friendly name used in dashboards. Uses URL if left empty; which is fine.
  # Avoid changing this later because it will live forever in your database.
  # Multiple controllers may share a role. This allows grouping during scrapes.
  #role = ""
  #url = "https://127.0.0.1:8443"

  # Make a read-only user in the UniFi Admin Settings, allow it access to all sites.
  #user = "unifipoller"
  #pass = "4BB9345C-2341-48D7-99F5-E01B583FF77F"

  # If the controller has more than one site, specify which sites to poll here.
  # Set this to ["default"] to poll only the first site on the controller.
  # A setting of ["all"] will poll all sites; this works if you only have 1 site too.
  #sites = ["all"]

  # Enable collection of Intrusion Detection System Data (InfluxDB only).
  # Only useful if IDS or IPS are enabled on one of the sites.
  #save_ids = false

  # Enable collection of Deep Packet Inspection data. This data breaks down traffic
  # types for each client and site, it powers a dedicated DPI dashboard.
  # Enabling this adds roughly 150 data points per client.  That's 6000 metrics for
  # 40 clients.  This adds a little bit of poller run time per interval and causes
  # more API requests to your controller(s). Don't let these "cons" sway you:
  # it's cool data. Please provide feedback on your experience with this feature.
  #save_dpi = false

  # Enable collection of site data. This data powers the Network Sites dashboard.
  # It's not valuable to everyone and setting this to false will save resources.
  #save_sites = true

  # If your UniFi controller has a valid SSL certificate (like lets encrypt),
  # you can enable this option to validate it. Otherwise, any SSL certificate is
  # valid. If you don't know if you have a valid SSL cert, then you don't have one.
  #verify_ssl = false